How to Build a Custom "Earthquake" Coffee Table

Here is a look at the finished table 1 of 2.

0

How To Rebuild Garage Stairs and Landing

Here is a picture of the old stairs and landing that crosses over the stairs that go to the basement from the garage. The "safety railing" or shoe rack was terribly made, it was very wobbly and gross to look at. The entire platform was made of 2x6 joist and although sufficient for this short span it was my choice to use 2x8 joist to make the landing closer to the height of the house floor.

2

How to Build Storage Shelves (In a Cold Room)

A look at the complete Shelves. They are free standing as I did not want to put any holes into the cinder blocks.

0

How to Build a New Set of Stairs

This is the existing stair case. A side from being extremely ugly these stairs were only 9 inches wide, this is a huge problem for my size 14 feet. So they had to go.

0

How Paint Kitchen Cabinets

This is how it looked when we moved into the house. 1 of 2

0

How to Build a Deck (with a Hot Tub in the Middle)

A look at the completed deck with new patio pad and landscaping around it.

2

How to Build a Semi-Privacy Fence with Top Lattice

A look at the finished Fence. 6 foot tall with added 1 foot of lattice on top.

1

How to Build a Treasure Chest & Memory Chests

0

How to Build Custom Built-In Book Shelves / Home Library

Completed library shelves 1 of 2

1

How to Build a Closed Off Wall and New Railing/Banister

Completed new wall and banister.

0

How to Build a Simple 2x4/1x6 Benches + Table

Here is the completed benches with a coat of Thompson's Water Seal Plus Stain.

0

How to Build a Shed

This shed build could only be completed after the concrete pad was ready. See my post on pouring the pad here: 

Do It Yourself Builds: DIY Builds - Pouring a Concrete Pad for Shed

A look at the end result. All sides covered with vinyl siding, roof shingled and soffits screened in.

4

How to Refurbish an Old Delta Table Saw

I bought a used Delta table saw and decided to refurbish it back to glory. Above is the before and after.

3

How to Build a Custom TV Stand

Here is the completed TV stand. It has been in use for 5 years and is in perfect condition even after moving twice. The Wii was originally deigned for a DVD player and the space below was originally made for a VCR (yes I had one 5 years ago). The top shelves were designed for DVD game cases but have since migrated into CD books.

0

How to Pour a Concrete Pad for Shed

A look at the completed pad.

1

How to Paint a Fireplace (Black and White)

This is what we got when we bought the house. The brass on the fireplace was not impressing my wife so you can see below pictures for the end result.

0

How to Build a Tool Bench With Large Pull Out Storage

Tool bench 2 years after completion.

0